Search options (Page 3 of 10)

Yuuko

Ok lets better do like a fresh installs and more in my way ok? to see hows it going for you after.

1- Uninstall PotPlayer, including it remaining folder when it ask you, i know its not need but just in case and install the recommended PotPlayer v1.6.53356 32-bits + open code pack again. Follow instruction for installation as the guide.
2-Unistall Ffdshow again and install it again ( last version ). Follow instruction as guide.
3- Unistall AviSynth, including the one you manually pasted in system. Install AviSynth again but SVP version the one from SVP download page. Dont copy and paste manually other avisynth dlls to system.
4-Unistall Lav Filters and Madvr as administrator, delete their folders. Download lastest Lav Filters, copy and paste the folder in a different place ( not the one where it was before ). Install their .bats as administrator. Download MadVR v0.87.21, copy and paste the folder in a different place ( not the one where it was before ). Install it as administrator, then click in restore default settings .batch file.
5-Download lastest Reclock and install it.
6-Reset SVP Profiles and select the CPU more closer to your CPU.
7-Follow instruction as the guide to install and configure ffdshow raw video filter.

Even if its not significant as you said the use of madVR, it must work anyway. Im sure something is missing there...

Ok once all set, follow these steps:

1- Run PotPlyar as default, dont change anything. Play that MKV movie and make sure all is ok.
2- Configure PotPlayer as the guide,set EVR CP as video renderer and set ReClock as audio renderer. Dont use SVP yet. Play that MKV movie again, make sure all running ok.
3- To this point if all working ok, now launch SVP, play that MKV movie and make sure everything is ok.
4- Set MadVR video renderer in PotPlayer ( follow instructions as the guide ). Dont use SVP. Play that MKV movie again, check if its working.

Good luck, keep me informed.

Hi hi, sorry for the delay, been busy.

Ok i dont know somethings because i need you to provide me like screenshots if possible or what settings are in use in the active svp profile of the only or few 1080p videos that are you trying to play or if you are using MadVR video renderer or EVR CP video renderer or what settings are you using in madvr in case if its in use and what version of PotPlayer are you using...

The most important to do here to figure out what is causing your performance lost would be:

1- Reset PotPlayer to it default settings.
2- When PotPlayer is reset to it default settings and without change any settings, " play any video " and see your CPUs usages. They should be low or normal.
3- If PotPlayer ( default settings ) is working okey with normal or low CPUs usages, change just one settings at time and test play the video(s) again. I mean if all working ok with PotPlayers default, then try to use MadVR video renderer ( reset it to defaults ) to see what happen. If all working ok and gettings again normal or decent or low CPUs usages using MadVR video renderer ( it default settings ), use SVP then and check again.

Im sure something there you were changing/testing/toying in MadVR in case if its in use and your SVPs active profile settings, are too high and pushing your hardware to it limits, best is disable and enable, test, lower settings then test again until you find out what settings is pushing the limits of your CPU when playing for example 1080p videos ( as you said ). 1080p videos will push high your CPUs and GPUs using SVP and much more using MadVR. Not all 1080p videos are encoded the same as others, if their framerates are constant or variable, they will affect by much or less your final performance. 23.976 fps are the low and should give best performance, things change when they are 25 fps ,29.97 fps, 30 fps and 60 fps. To know the original frames of the videos are you playing with / without SVP, press Tab while the video is playing.

Try to use the PotPlayer version im recommending, it work best with Nvidia Cuda. About the SVP profiles, i need to know what settings are active in the active profile of the 1080p video(s) you are trying to play.

good luck and keep me informed.

Guide Updated

-Added madVRs Scaling Algorithms and image doubling in 5- Extras/2- MadVR Video Renderer/Advanced settings.
-Added madVRs Scaling Algorithms and image doubling Presets, as examples and point to start for new users and users who want to increase quality for anything less than 1080p.

Note: there is not " best " preset or settings here, the best preset or settings at the end, are the ones you like and make. You can share them if you want here to everyone see them / try them.

Thanks! orky87, more coming soon.

Update 2

-Added link / updated " SVP Advanced profile settings " in Extras. For new users and users who wants a point to start to make their own custom profiles based in their " likes and hardware limitations ".
-Added recommended svp example profiles as where to start for making your own svp custom profiles.

Hi Slim, I was asking you to show me what is causing your CPU goes high that bothers you.. but if its normal, then not need.

All working ok with Madvr and your GPU ?

Hey Slim any chance you can show me at least one screenshot?. Maybe you are abusing some settings without need and not seeing the real changes.
Try to use Nvidia Cuda if your Video Renderer is EVR CP. Using Madvr video renderer + some demanding Madvr settings + Nvidia Cuda result in heavy cost in performance for the GPU.
Your hardware is pretty decent as I said, in especial that GPU. Following my settings correctly must give you very decent performance and more room in performance for your SVPs settings / Madvr ( in case of using it ). Your CPU usages are too high for your like,? then the default settings in SVPs profiles are demanding, you can try to lower them and see what happen.
You want to know the basic settings to edit and create custom SVP profiles? check " 4- SVP settings " in the guide, it was added recently then tell me later.
More will be added soon, I already have my wanted free time so now on Im dedicating more time in this. You must Re-check the entire guide again now and change what must be change in case of need.

Thanks, good luck Slim.

Two peoples told me that lastest PotPlayer betas 1.6.53746 have problems with PotPlayers NVIDIA Cuda decoder, only beta v1.6.53356 seems to work perfectly. You can have updated to last version and use Lav Video Decoder > Video Decoder > NVIDIA CUVID. All of this for Nvidia GeForce users who like to use NVIDIA Cuda Decoder.

I will take this time to explain and say some important things to all of you, to peoples who already know this Thread and follow since long time, to the new peoples that for first time are trying to use this Guide and to SVP Team. Before start I have to say sorry for my bad English.

Thanks to all peoples who are following me since long time, thanks to all peoples who liked this Guide even if they thought for a moment it was too simple or incomplete but still helpful, thanks to all peoples who were trying and try to help me and thanks to SVP Team for all this years keep this Thread active.
Sorry to all of you who had been waiting for some stuffs to be done, sorry if this had been taking too long to be complete, sorry if some of you thought I was not giving the enough attention or dedication as it must. As some of you already know, I been deleting, re-editing, deleting again and re-editing again, it was by many reasons.

-When I started this guide I just wanted to share why i like PotPlayer more than other players, I know MPC HC is the most popular and more used than others players? same with Madvr, Lav Filters and more. Say why im not using them is a long story, but the thing here is PotPlayer + SVP + Makens settings.
-I wanted to start this as simple as possible, I liked PotPlayers internal filters and decoders, I did not see in these times the use of more filters, etc. For me was all ok, just one or two things to add and that's all. Even with that there were still peoples saying it was ok and it helped them too.
-When I was discovering new stuffs and trying them, I was limited by my old hardware, when most peoples was using at least something decent and up to date I was still stuck with very old hardware by many personal reasons, but still I was able to make run many things as I wanted and share them here.
-I remember at the beginning this was most of the time only text, then later images then both. Ive had add more stuffs then delete again and so because in others old threads that was made long ago there was some peoples commenting between them why I was not using for example ReClock and more in my guide, then I thought well lets try use or add them to this as optional for the peoples who like them or wanted to see them in combination with PotPlayer.
-When I started to be more offline, it was because many personal things, some I tried to explain and others I could not. There was a time I was off from this like months right SVP Team? they know, in these moments I could not be much active here and explaining why, I was afraid and thinking: sure SVP Team will delete my Thread because it inactivity and if it were the case, not problem its reasonable, they have the rights to delete what is not active and more if its not helping peoples. If that happen I wont be mad, I will still keep using SVP because im in the point of Im too used to it, cant watch my stuffs without it. If what im trying to do violate any kind of rules made by SVP im sure they will be gentle and tell me hey Mak we got a problem and find a way to fix it. I really appreciate that.

I had been too busy with family stuffs, i don't have internet but im really working on fix that as much as I can. Im about soon to have some internet sharing by WiFi, then I will update this more. Opinions are always welcome, I will try to see what I can add or not, some of you must understand as well I have rights still to make this Guide as I think is the best, i know some of you will like it and some of you will not, its ok that. Like I said many times if someone dont like this option, they can skip this and try another. I cant tell right now if it will long or too short this, wait when its almost complete, then if you want to share something , lets see what I can do.

Right now the Guide is still usable, it just have the basic settings to start using PotPlayer + SVP and default settings made by it. What left are Extras and if you want to have more or less an idea what are they, you can check previous pages.

@Slim
You can follow it as its, its all the basic settings do you need to start using that player + svp. What left are just optional stuffs or lets say what left for " Extras " section, and its like basic settings for Madvr, Lav video decoder, svp and more. Its not complete because my job and family stuffs, been very busy but I always check this to see what is new. When my vacations come, I will complete all.

@James D
I don't see what is the problem, as its is simple and easy  . Images very easy to understand and follow. When you say " people wouldn't run away being frighten of the Guide's size " where are those peoples? who are they ?    so far not even from the peoples who know me and contacted me had not complained or make me feel that its doing that.

@MAG79

Hi, good to see that, waiting for it too.