Search options

NM64, you are right, using 50hz looks much better. Almost no artifacts.

Yes this Sony tv support 30, 48, 50 and 60 Hz.

I define it from the video card of the notebook (alienware 17 r3 / nvidia gtx 970m). The maximum allowed is 60hz. I can customize it, but I think for hdmi the maximum is 1080/60p. You can see print screen of settings...

these are the specs of tv ...

Corresponding PC input signal
(Resolution, Horizontal frequency/Vertical frequency)
640 x 480, 31.5 kHz/60 Hz
800 x 600, 37.9 kHz/60 Hz
1024 x 768, 48.4 kHz/60 Hz
1152 x 864, 67.5 kHz/75 Hz (2K Full HD models or 4K models only)
1280 x 1024, 64.0 kHz/60 Hz (2K Full HD models or 4K models only)
1600 x 900, 56.0 kHz/60 Hz (2K Full HD models or 4K models only)
1680 x 1050, 65.3 kHz/60 Hz (2K Full HD models or 4K models only)
1920 x 1080, 67.5 kHz/60 Hz (2K Full HD models or 4K models only)*

* The 1080p timing, when applied to the HDMI input, will be treated as a video timing and not a PC timing. This will affect the [Display] settings. To view PC content, set [Wide mode] to [Full], and [Display area] to [Full pixel] (2K models) or [+1] (4K models). ([Display area] is configurable only when [Auto display area] is set to [Off].)

Note
This TV does not support interlaced PC signals.
For optimum picture quality, it is recommended that you use the signals from the above list “Corresponding PC input signal” on your PC settings.
Depending on the connection status, the image may be blurred or smeared. In this case, change the PC’s settings, then select another input signal from the above list “Corresponding PC input signal.”
1920 x 1080/60 Hz output may not be available, depending on your PC. Even if 1920 x 1080/60 Hz output is selected, the actual output signal may differ. In this case, change the PC’s settings, then select another input signal from the above list “Corresponding PC input signal.”

Thks NM64. I now change "Fixed frame rate" by "to screen" and looks perfect. Almost no are artifacts.

Hi Blackfire,  I have the Sony KDL-50W805C.

The TV had set in much the same way. Now configured like you. (Except BLACK ADJUST, I like ON and not let me disable CineMotion, not know why). As you have the color values?

In the SVP settings, Frame interpolation mode, set it up as 1.5m, because sometimes in Uniform does not look good. (Many artiffack around the figures, like as bubbles in the outline of the figures, not what I mean).

The movies/series see them very well. I not see much difference because the values they had were very similar.

Nvidia GTX 970M
Which graphics card you have? nvidia? that you use to nvidia settings (resolution / video / screen, etc.)?

I do not see much difference with svp activated. (In a movie with 23.976fps processed at 60fps with svp) for example, that film could tell the difference?