Waiting for ffdshow video... issue (Page 2 of 3)

tecram

You must first disable fast channel switching in DVBViewer Pro
you can use ffdshow as decoder but you must enable mpeg2 decoding of ffdshow for SD satellite channels.
but it is better to use your own decoder in dvbviewer but add "ffdshow raw video filter" as PostProcessor
for this edit video PostProcessor plugin setting:
Help > Configuration folder > Plugins > PostProcessor.ini
edit:

[Setup]
PostProcessor=ffdshow raw video filter

[Postprocessors]
CLSID.0={0B390488-D80F-4A68-8408-48DC199F0E97}
Name.0=ffdshow raw video filter
CLSID.1={0524CEA7-7E7D-4804-8A7B-D17A99807D3C}
Name.1=NVidia Post Processor
CLSID.2={3BAFDCB6-8CF6-4D08-9FCE-2D2883A9FB32}
Name.2=Creeo Post Processor
CLSID.3={F9BA22CA-0704-45EE-A8F9-AC246411A6FA}
Name.3=MoMoLight
CLSID.4={04FE9017-F873-410E-871E-AB91661A4EF7}
Name.4=ffdshow Video Decoder

[ExcludeDecoders]
//CyberLink H.264/AVC
0={F141C519-48A6-4B92-8053-AFEE27D5D069}
//CyberLink H.264/AVC (PDVD7)
1={D12E285B-3B29-4416-BA8E-79BD81D193CC}
//CoreAVC
2={09571A4B-F1FE-4C60-9760-DE6D310C7C31}
//MainConcept AVC/H.264
3={6A270473-9994-4AEB-801F-BB2C4E56EE38}

restart dvbviewer and select ffdshow raw video filter in  plugins > video PostProcessor

note: if Yo have problem with colors(blue > yellow) enable postprocessing in ffdshow raw video filter.

I prefer this method so for my onboard ATI GPU I can use Cyberlink video decoder (HAM) and ffdshow raw video filter as PostProcessor ( SVP use this for increase frame rate) and EVR Custom for Renderer.

Are you going to check if your player really is NOT running as administrator?

No way to check, only that greyed out "UAC virtualization" option in task manager. Option is grey, somebody told me (maybe You), it means the player runs as admin. According to this, default installation of SVP makes the MPC-HC running as admin by default. But the SVP manager - if I just start it normally - has "UAC virtualization" option not greyed out, and SVP not works. "Waiting for ffdshow video..." and that's it. The icon is not freezed If I start to play a movie, just simply not works.
If I start the SVP manager as admin, SVP works seamlessly.

See the picture:

First instance of mpc-hc is "disabled" and it means it's running with user privileges, second one is "not allowed"

So you just have to figure out why your MPC-HC runs as admin. May be you've got "Run this program as administrator" option checked at "Properties" -> "Compatibility" page and some strange (="non default") UAC settings? 

Non-privileged process (SVP) can't "talk" with privileged one (ffdshow instance inside MPC-HC). That's the reason.

"normally", does SVP and MPC-HC has to run together as non-admin?

Yes, sure.

I did not modify or alter MPC-HC installation settings in any way. I did not set anyting on it's properties. It's the same for UAC, it's not disabled, nor any settings modified.

So it's a miracle. I wash my hands

Installed SVP_3.1.4.exe full (did not install mpc or madvr)

Followed instructions at http://www.svp-team.com/wiki/Daum_PotPlayer_with_DXVA

In my current Potplayer version, there is no "prefer" option, but everything else was set

Fixed in Preferences -> General -> Multiple launching: Play the clicked file (it was set "add the file to playlist")

Waiting for ffdshow video on systray icon mouseover.

Unhandled exception occurred at....... potplayer.dll

That's about it, I don't what else to offer at this time. 

Please advise

thanks
__________________________________________
SVP_3.1.4.exe
PotPlayer 1.5.36073
XP PRO SP3
IE 8
FIREFOX 19 & 20B4
nVIDIA GeForce GT 610 (GF119)
GeForce 310.70 - WHQL Driver - Dec 17, 2012DualCore
Intel Pentium D 805, 2666 MHz (20 x 133)
2 gb ram

Turns out I was using the "Video Decoder" tab instead of the "Custom Filter manager" tab to install the ffdshow raw video filter.

It works now, but not very well, unfortunately.

I get this onscreen display (see below) which you must recognize during very choppy You Tube playback, and SVP even adversely affects playback of local files unless I turn SVP off.

I am unable to lower the video profile below 720x576@25.

Is my system too underpowered for SVP? My system tray cpu monitor reading doesn't match (is lower than) the onscreen reading I get from SVP

I've added further system info below

edit:  Follow up shows that if I exit SVP Manager and use only SVPTube, You Tube playback works pretty well, nice and smooth.

Potplayer did crash during a You Tube playback, but it was directly after I shut down the SVP Manager, so maybe the cpu was still affected, but subsequent trials have so far gone smoothly.
_______________________________________________
SVP_3.1.4.exe
PotPlayer 1.5.36147
XP PRO SP3
IE 8
FIREFOX 19 & 20B4
nVIDIA GeForce GT 610 (GF119)
GeForce 310.70 - WHQL Driver - Dec 17, 2012
DualCore Intel Pentium D 805, 2666 MHz (20 x 133)
2 gb ram

Done.  You want me to attach it here?

I'm use PotPlayer 1.5.36197 x86 and still unable to use SVP because i see in SVP Manager Waiting for ffdshow video ,any advice or help to solve this issue. Best Regards.
http://i25.photobucket.com/albums/c59/M … 20ania.png
http://i25.photobucket.com/albums/c59/M … nia_v1.png
http://i25.photobucket.com/albums/c59/M … wienia.png
http://i25.photobucket.com/albums/c59/M … nia_v1.png
http://i25.photobucket.com/albums/c59/M … nia_v2.png
http://i25.photobucket.com/albums/c59/M … nia_v2.png
http://i25.photobucket.com/albums/c59/M … r2dane.png
http://i25.photobucket.com/albums/c59/M … acutew.png
http://i25.photobucket.com/albums/c59/M … ewDXVA.png
http://i25.photobucket.com/albums/c59/M … wienia.png

all these tabs is present on my ffdshow video decoder configuration panel ,but still i'm see Waiting for ffdshow video and SVP doesn't work for me ........

17:46:07.793; Start: SVPMgr 3.1.4 (901) starts...
17:46:07.797; AppDataPath: C:\Users\Paweł\AppData\Roaming (ANSI)
17:46:07.800; Start: read settings file settings.ini
17:46:07.804; Start: load language file - English. Duration: 103 ms
17:46:07.907; Start: check launched instance of SVP-manager. Duration: 8 ms
17:46:07.915; Start: check Avisynth installed
17:46:07.918; Start: clear Logs folder
17:46:07.923; Start: performance graphs prepare
17:46:07.928; Start: SVPMgr folders prepare. Duration: 13 ms
17:46:07.941; Start: read settings file SVPMgr.ini
17:46:07.945; Start: GPUs settings detection. Duration: 26 ms
17:46:07.971; Start: detected graphics (OpenCL) adapter: 11. GeForce 8800 GTS (320)
17:46:07.974; Start: monitors settings detection. Duration: 844 ms
17:46:08.818; Start: detected monitor: 1024 x 768 @ 85.252
17:46:08.821; Start: disable LNG-file write when UAC enabled
17:46:08.822; Start: change SVP-manager priority
17:46:08.824; Start: register hotkeys. Duration: 10 ms
17:46:08.834; Start: get versions of modules used
ffdshow.ax/avisynth.dll: 1.3.4500.0/2.5.8.6
svpflow1/2.dll: 1.3.3.0/1.4.1.0
svpflow_cpu/gpu.dll: 1.7.2.0/1.7.7.0
17:46:08.837; Start: refresh autostart state in registry
17:46:08.838; Start: some more work with registry. Duration: 11 ms
17:46:08.849; Start: create menu. Duration: 10 ms
17:46:08.859; Start: update settings file settings.ini. Duration: 47 ms
17:46:08.906; Start: update monitor settings
17:46:08.908; Start: prepare "About the program" window. Duration: 77 ms
17:46:08.985; Start: enable ffdShow waiting mode
17:46:08.987; RefreshSVP. Duration: 292 ms
17:46:09.279; ===== Waiting for ffdshow video
17:46:09.282; Start: prepare to work is complete