Very high CPU with 3.1.4 in 1080p

Update to above. This is only happening on a few 1080p videos, not all. I get an OSD message about high CPU usage, and to try adjusting the filter settings. What should I be adjusting?

Here's Mediainfo for one of the files:

Video
ID                                       : 1
Format                                   : MPEG Video
Format version                           : Version 2
Format profile                           : Main@High
Format settings, BVOP                    : No
Format settings, Matrix                  : Custom
Codec ID                                 : V_MPEG2
Codec ID/Info                            : MPEG 1 or 2 Video
Duration                                 : 2h 6mn
Bit rate mode                            : Variable
Bit rate                                 : 17.1 Mbps
Maximum bit rate                         : 80.0 Mbps
Width                                    : 1 920 pixels
Height                                   : 1 080 pixels
Display aspect ratio                     : 16:9
Frame rate mode                          : Constant
Frame rate                               : 29.970 fps
Color space                              : YUV
Chroma subsampling                       : 4:2:0
Bit depth                                : 8 bits
Scan type                                : Interlaced
Scan order                               : Top Field First
Compression mode                         : Lossy
Bits/(Pixel*Frame)                       : 0.276
Stream size                              : 15.1 GiB (96%)
Default                                  : Yes
Forced                                   : No

jkauff
Video

You not need for SVP for such type of video. 29.97 fps after deinterlacing become 59.94 fps.
Use DXVA for this purpose or if you have NVIDIA card then you can use LAV CUVID decoder with HW deinterlacing.

I first wanted to start a new thread but it seems my results are similar, except that my files are progressive.

SVP 3.1.4, consumes 10% more GPU and additional 10% CPU with GPU acceleration enabled, when playing such a movie file: MPEG4 Video (H264) 1920x800 23.976fps. With a video of nonstandard dimensions: MPEG4 Video (H264) 1916x796 23.976fps, GPU acceleration consumes full GPU power and additional 23% CPU (which results in a slide show).

There are no such issues for 720p videos.

My system specification is: CPU Intel E5700, 2 cores @ 3GHz, 4 GB DDR3 @ 800 MHz, GPU Nvidia 9800GT, PCI Express reported by Nvidia Inspector: PCI-E 2.0 x 16 @ x 16 1.1. SVP configuration:

# This script was generated by SmoothVideo Project (SVP) Manager.
# Check http://www.svp-team.com for more details.

SetMemoryMax(1024)

global svp_scheduler=true
global threads=3
global svp_cache_fwd=threads+2

LoadPlugin("C:\Program Files (x86)\SVP\plugins\svpflow1.dll")
LoadPlugin("C:\Program Files (x86)\SVP\plugins\svpflow2.dll")

SetMTMode(3,threads)
ffdShow_source()
SetMTMode(2)

global crop_params=""
global resize_string=""
global super_params="{pel:1,scale:{up:2},gpu:0,full:false,rc:true}"
global analyse_params="{vectors:2,block:{w:32,h:32,overlap:0},main:{search:{coarse:{distance:-10}}}}"
global smoothfps_params="{rate:{num:3,den:1},algo:1,scene:{blend:true}}"

global demo_mode=0
stereo_type=0

I just tried it, GPU is still 88%.

With GPU acceleration: around 40% on fullscreen, 20% in a window; without acceleration - 30% fullscreen, 10% window.

Nvidia inspector shows VPU load around 30%, so hardware decoding works well for any resolution. Also SVP works for this movie (without GPU acceleration), using 60-80% CPU. There is no excessive CPU load, which might suggest decoding of h.264 in software. And I already have CUVID in LAV settings.

I made some samples with Freemake, all with height=800 and different width: 1912, 1908, 1900 all worked well. The only problematic sample was that of width=1916.

I'm not talking about high CPU load. See:

I'm attaching screenshots so you could see what's going on.

qduaty
Another problematic resolution: 718x436
Thank you again.

AddBorders(4,0,0, 0)
It is not good solution for frame interpolation task. Thin black line at the frame border causes annoying frame-borders artifacts when panning and zooming.

mult=16
crop(0,0,int(width/mult)*mult,int(height/mult)*mult)

And ajust mult value. It can be 8, 16, 32.

2. Expand framesize in ffdShow to multiply of 16 (or 8, 32).